The HP series delivers elevated feeds and speeds in steels, alloy steels, and cast iron. Available in 4 and 5-flute configurations with round and Weldon shanks. Long-reach variants for deep-pocket and hard-to-reach features. Square, corner radius, and ball nose end faces.
24 sizes available, 4 flute, AlTiN coating, XL length, RND shank.
| EDP | Diameter | Shank | LOC | OAL |
|---|---|---|---|---|
| DXR23202 | 3/16 | 3/16 | 1-1/8 | 3 |
| DXR23229 | 3/16 | 3/16 | 1-1/8 | 3 |
| DXR23472 | 3/16 | 3/16 | 3/8 | 4 |
| DXR23204 | 1/4 | 1/4 | 1-1/2 | 4 |
| DXR23230 | 1/4 | 1/4 | 1-1/2 | 4 |
| DXR23474 | 1/4 | 1/4 | 3/8 | 4 |
| DXR23208 | 5/16 | 5/16 | 1-5/8 | 4 |
| DXR23231 | 5/16 | 5/16 | 1-5/8 | 4 |
| DXR23476 | 5/16 | 5/16 | 7/16 | 4 |
| DXR23212 | 3/8 | 3/8 | 1-3/4 | 4 |
| DXR23232 | 3/8 | 3/8 | 1-3/4 | 4 |
| DXR23478 | 3/8 | 3/8 | 1/2 | 4 |
| DXR23216 | 1/2 | 1/2 | 3 | 6 |
| DXR23233 | 1/2 | 1/2 | 3 | 6 |
| DXR23480 | 1/2 | 1/2 | 5/8 | 5 |
| DXR23220 | 5/8 | 5/8 | 3 | 6 |
| DXR23234 | 5/8 | 5/8 | 3 | 6 |
| DXR23484 | 5/8 | 5/8 | 3/4 | 5 |
| DXR23224 | 3/4 | 3/4 | 3 | 6 |
| DXR23235 | 3/4 | 3/4 | 3 | 6 |
| DXR23488 | 3/4 | 3/4 | 1 | 5 |
| DXR23198 | 1 | 1 | 3 | 6 |
| DXR23228 | 1 | 1 | 3 | 6 |
| DXR23466 | 1 | 1 | 1-1/4 | 5 |